Menu
CPE
HiFlexTM CPE 135A
HiFlexTM CPE 135A is a chlorinated polyethylene elastomer specially polymerized by combining chlorine & polyethylene. HiFlexTM CPE 135A is primarily also used as a modifier for synthetic rubbers improving various physical and mechanical properties at the same time improving processability. HiFlexTM CPE 135A is also used as a modifier for PVC, EVA and other polyolefin’s.
Compatibility:
HiFlexTM CPE 135A is easily blendable with most rubbers SBR, BR, CR, CSM, EPDM, NBR, NBR/PVC, ACM etc. It can also be used as a modifier for PVC, EVA, PE, ABS etc.
Applications:
Moulded products like gasket, industrial & automotive hoses, high performance industrial cables, tubings, air ducts, general mouldings, conveyer beltings, rubber sheets, dock fenders, power cables,PVC modification, footwear, extrusions, etc.
Supply Form:
25 kgs HDPE bags.
RAW MATERIAL PROPERTIES
| Properties | Unit | Test Method | Specification |
| Appearance | – | – | White Powder |
| Chlorine Content | % | GB/T/139 | 34-36 |
| Heat of Fusion | J/g | HG/T2704-2010 | ≤ 2.0 |
| Volatiles | % | ASTM 5668 | ≤ 0.3 |
| Sieve Residue (30 mess) | % | GB/T2914 | ≥99 |
| Bulk Density | g/cm3 | GB/T-2022-2005 | ≥ 0.50 |
| Hardness | Shore A | GB/T531 | ≤ 57 |
| Tensile Strength | MPa | GB/T 528 | ≥ 10.0 |
| Elongation at Break | % | GB/T 528 | ≥ 800 |
| Ash Content | % | HG/T2226 | ≤ 5 |
702/703 Prasad Chambers, Tata Road No.2, Swadeshi Mills Compound, Opera House,
Mumbai – 400004, INDIA.
+ 91 22 23632222 / + 91 22 23612222
+ 91 9323008200