NBR

HiFlexTM N-34

HiFlexTM N-34 is a blended copolymer of acrylonitrile and butadiene. HiFlexTM N-34 has very good processability and heat resistance. It has good resistance to aliphatic hydrocarbon oils, fuels and greases. It shows low gas permeability and good hot air resistance.

Applications:

Oil seals, cork sheets, O-rings, gaskets and other industrial products requiring oil and abrasion resistance.

Supply Form:

34 kgs bale wrapped in dispersible film.

RAW MATERIAL PROPERTIES

 
Properties Nominal Value Test Method
Mooney Viscosity (ML 1+4 @1000 C) 50 +/- 10 MU ASTM D1646
ACN Content 30 +/-3% Internal Method
Moisture Content 1.0% max Internal Method
Ash Content 1.5% max ASTM D297-35
Density 0.98 g/cm 3 ISO 1183
Antioxidant Non-Staining –
 
 
Physical Properties* Value
Tensile Strength 16.5 MPa
Modulus at 100% EB 6.5 MPa
Elongation at Break 300%
Hardness 73 Shore A
* Characteristics determined on a HEPL compound of the following formulation. Press Cure: 10 mins @ 1600 C
 
HiFlexTM N-34100
Zinc Oxide5
Stearic Acid1
FEF N-55050
DOP10
Qureacc® TMT0.5
Qureacc® MBTS1
Sulfur1.5
HiFlexTM N-34 Brochure

Our Products

702/703 Prasad Chambers, Tata Road No.2, Swadeshi Mills Compound, Opera House,
Mumbai – 400004, INDIA.

+ 91 22 23632222  / + 91 22 23612222
+ 91 9323008200

[email protected]