SPECIALTY RUBBER CHEMICALS

Calcium Hydroxide C-2000

C-2000 is a cross-linking activator specially for fluoroelastomer. It is used in polyol & polyamine cure type fluoroelastomers. In both type fluoro rubber, magnesium oxide is used as acid acceptor and CALCIUM HYDROXIDE, C-2000 is used as cross linking activator. Magnesium Oxide 3 to 40 Phr can be absorbed in fluoroelastomers by adding C-2000 to reduce cost of compound.

calcium-hydro

PHYSICAL & CHEMICAL CHARACTERISTICS

Physical Topics Standard
Colour White
Appearance Powder
Floating On Water Yes
Smell No Smell
Specific Gravity (200 C) Around 2.2 g/cm3
Apparent Specific Gravity Below 1.2 g/cm3
Sieve Residue (149 u Mesh) Below 0.001%
Sieve Residue (74 u Mesh) Below 0.001%
Particle Diameter (Average) 9.0 ~12.0 Mu
Chemical TopicsStandard
MoistureBelow 1.5%
Purity (Ca (OH)2 )Below 98.5%
Magnesium Oxide (MgO)Below 1.0%
Ferric, Aluminium Oxide (R203)Below 1.0%
Acid – Insoluble (SiO2 )Below 0.5%

Mode of Action :

Use of C-2000 improves properties such as high processing safety, very good stability of compound and optimum (low) compression set specially at high temperatures and high tensile strength.

Application :

  • Add C-2000 6 Phr, magnesium oxide (Starmag® 150) 3 Phr to 5 Phr in polyol type fluoroelastomers
  •  Add C-2000 3 Phr polyamine cure type fluoroelastomers to improve metal to rubber bonding. Add min 15 Phr of low active magnesium oxide (Starmag® L)
  • C-2000 should be added together with magnesium oxide and carbon black by premixing C-2000, magnesium oxide and carbon black, and then adding to masticated Fluoroelastomers.

Precaution of Handling :

C-2000 absorbs moisture quite fast, so please open container and measure just before adding to compound. Please seal the container immediate right after you take out necessary quantity from container

Packing :

Plastic container of 500 gms

702/703 Prasad Chambers, Tata Road No.2, Swadeshi Mills Compound, Opera House,
Mumbai – 400004, INDIA.

+ 91 22 23632222  / + 91 22 23612222
+ 91 9323008200