EPDM

HiFlexTM EPDM A ( Non Oil )

HiFlexTM EPDM A is a low cost blended terpolymer of ethylene, propylene and diene. HiFlexTM EPDM A has very good processability and is compatible for co-curing with conventional diene rubbers. It shows excellent resistance to oxidation and ozone degradation.

Applications:

Grommets, sheets, and other industrial moulded products requiring ozone resistance.

Supply Form:

25 kgs bale packed in strippable bags.
HiFlexTM-EPDMA-removebg-preview

RAW MATERIAL PROPERTIES

Properties Nominal Value Test Method
Mooney Viscosity (ML 1+4@ 1250 C) 55 +/- 5 MU ASTM D1646
Ethylene Content 58 +/- 5% Internal Method
ENB Content 4 +/- 1% Internal Method
Moisture Content 1.0% max Internal Method
Ash Content 1.5% max ASTM D297-35
Density 0.86-0.87 g/cm 3 ISO 1183
Antioxidant Non-Staining –
 
Physical Properties*Value
Tensile Strength14.5 MPa
Modulus at 100% EB7.0 Mpa
Elongation at Break250%
Hardness72 Shore A

* Characteristics determined on a HEPL compound of the following formulation. Press Cure: 10 mins @ 1600 C

 
HiFlexTM EPDM A100
Zinc Oxide5
Stearic Acid1
FEF N-55080
Paraffinic Oil20
Qureacc® TMT0.5
Qureacc® MBT0.5
Qureacc® ZDBC1
Qureacc® MBTS1
Sulfur1.7
HiFlexTM EPDM A Brochure

Our Products

702/703 Prasad Chambers, Tata Road No.2, Swadeshi Mills Compound, Opera House,
Mumbai – 400004, INDIA.

+ 91 22 23632222  / + 91 22 23612222
+ 91 9323008200

[email protected]